API Schmidt-Bretten compatible
Sigma S49X plates
Replacement plates built to fit the API Schmidt-Bretten Sigma S49X. Supplied by Synergizing Technologies — these are compatible parts, not API Schmidt-Bretten parts.
- Chevron configuration
- H&L
H is the high-theta (hard) plate, L the low-theta (soft) plate. Mixing them sets the channel's duty — tell us the arrangement in your unit and we will match it.
Attribution inferred. This plate was matched to API Schmidt-Bretten from its model number rather than from a stated brand. Send us a photograph of your nameplate and we will confirm before quoting.
Gaskets are checked for fitment against the plate, and every plate is backlit in a darkened room, where a crack shows as a line of light.
What we need from you
- The model number stamped on the frame, and the plate count.
- The service — what flows through it, at what temperature and pressure. Gasket compound is chosen on the fluid, not on the model.
- A photograph of the nameplate if you have one. It settles every ambiguity at once.
Other API Schmidt-Bretten models
- SIGMA M66
- SIGMA M76
- SIGMA M96
- SIGMA M106
- SIGMA M136
- SIGMA M156
- Sigma S76X
- SIGMA22
- Sigma48
- Sigma85
- Sigma149
- Sigma229
Synergizing Technologies is not affiliated with, authorised by, or a distributor for any original equipment manufacturer named on this site. Brand and model names are used solely to identify the equipment our replacement plates and gaskets are compatible with. All trademarks are the property of their respective owners.